If only relying on a single pump during the initial pumping phase of large process chambers or freeze dryers, the pumping curve is not steep enough, extending the production cycle.
A single pump type easily experiences pumping speed decay when crossing from low to medium vacuum, requiring pump trains to relay and maintain effective speed.
Extracted gases in chemical or pharmaceutical scenarios may entrain solvent vapors or trace particles, placing demands on the pump unit's pretreatment.
Unreasonable pump unit matching leads to wasted energy, and high-load operation of a single pump accelerates wear, increasing maintenance costs.
The Roots pump handles medium-high vacuum gain, while the backing pump bears the low-vacuum startup load. Matched according to conditions to form an effective pumping speed.
Designed for large process chambers or freeze dryers, helping to shorten evacuation time and improve production efficiency.
The unit is designed for industrial continuous operation scenarios, adapting to line cycles in PV lamination, vacuum drying, and vacuum packaging.
For condensable vapors or dust, condensers, gas-water separators, or filter units can be integrated to reduce potential media impact on the pump chamber.
Calculated based on target vacuum, chamber volume, and process cycle to match the pumping curve, reducing wasted selection or insufficient capacity.
Supports non-standard designs for special conditions like explosion-proof and anti-corrosion, ensuring stable and reliable operation in complex environments.
| Product Model | Motor Power | Ultimate Vacuum | Rated Voltage | Rated Flow | Rated Current | Industry Application |
|---|
Inside the Roots pump chamber, two figure-eight shaped rotors rotate synchronously in opposite directions driven by gears, pushing gas forward to be discharged by the backing pump.
The rotors do not contact each other or the pump casing, requiring no lubrication and allowing higher speeds to achieve larger pumping rates.
Using the Roots pump as the main pump combined with a backing pump and scientifically matched according to the process cycle, it effectively matches the pumping curve, reducing energy consumption and selection waste.
Compiled technical reference materials related to vacuum pumps for selection, equipment commissioning, and troubleshooting.

Pre-stage vacuum pumping for freeze dryers, requiring large pumping speeds.

Solvent recovery and vacuum distillation, dealing with condensable gases.

Rapid vacuum pumping in PV module laminators to ensure quality.

Rapid moisture and gas extraction from large drying chambers.

Provides a stable medium-vacuum backing environment for high-vacuum coaters.

Establishing negative pressure in various large industrial sealed vessels.

Maintaining high vacuum in the chamber during the sublimation drying phase.

Working with condensers to recover extracted solvent vapors.

Vacuum lifting and holding of heavy panels like glass and stone.

Vacuum pumping and varnish impregnation during insulation treatment.

Rapid gas extraction and sealing for large packaging bags.

Extracting internal bubbles to ensure tight bonding of encapsulation materials.
Usage Limitations: Not suitable for media containing large amounts of highly corrosive gases. Dust or moisture requires pre-filtration or condensing devices. Operating environment must meet motor heat dissipation requirements.
Selection Advice: Provide chamber volume, pumping time requirements, media components (condensable vapor/dust), continuous operating cycle, and explosion-proof/anti-corrosion needs. Include pipe resistance in calculations.
It requires comprehensive calculation based on your ultimate vacuum requirements, pumping volume, and media characteristics. We can assist with matching.
Depends on the volume. If large, we recommend equipping a condenser or gas-water separator as pretreatment.
Installing a filter unit and conducting regular cleaning and maintenance is recommended to prevent dust from entering the Roots chamber and causing wear.
Typically includes the Roots main pump, backing pump, base, connecting pipelines, and the electrical control system. Subject to the configuration list.
With reasonable structural design, it operates relatively stably under matched conditions and compliant maintenance, supporting long-term continuous operation.
We provide technical guidance and commissioning services. The specific service scope and costs are subject to the contract.
Please fill in your requirements carefully, and we will contact you within 24 hours.