Semiconductor and pharmaceutical cleanrooms are sensitive to oil content in the gas path; oil vapor may affect yield or destroy the clean environment.
Dusty airflow or solvent vapors entering the oil chamber accelerate oil degradation, increasing oil change frequency and pump wear.
Regular oil changes in oil-sealed pumps generate waste liquid disposal steps and maintenance records, increasing environmental compliance costs.
Special gas media impose higher requirements on standard materials and seals, making standard models prone to damage.
Screw or claw rotors compress without contact and without oil in the pump chamber, fundamentally reducing the path for oil vapor to enter the process gas circuit.
For extraction scenarios with small amounts of dust or water vapor/solvent vapor, it reduces the oil degradation issues compared to oil-sealed pumps.
No oil changes during operation helps reduce the burden of oil changes and waste liquid disposal, lowering oil-related maintenance workloads.
Provides an oil-free clean vacuum method for semiconductor, pharmaceutical, and chemical scenarios, helping to ensure product yield.
Reduces daily maintenance workloads related to oil products; pre-filtration or purge configurations can be added based on media conditions.
For corrosive gases, it can be matched with corresponding wetted materials, sealing solutions, and pre-filtration/purge configurations.
| Product Model | Motor Power | Ultimate Vacuum | Rated Voltage | Rated Flow | Rated Current | Industry Application |
|---|
Centered on a dry screw or claw pump, no lubricating oil participates in the compression process, fundamentally avoiding oil mist contamination.
The screw rotors rotate synchronously in opposite directions within the chamber, continuously pushing gas forward to the exhaust end to achieve extraction.
By fundamentally isolating oil mist, the output gas path is oil-free. Combined with pre-filtration and condensation, it adapts to harsh processes sensitive to oil content and complex media.
Compiled technical reference materials related to vacuum pumps for selection, equipment commissioning, and troubleshooting.
A comparison of dry screw and claw vacuum pumps in rotor design, achievable vacuum, efficiency and the applications where each excels.
When using a dry screw vacuum pump, operational mistakes may cause water to enter the pump. If the amount of water is small, within 2 liters, open the oil drain...
The dry screw vacuum pump uses a pair of screws rotating synchronously in opposite directions at high speed in the pump chamber. The two rotors together with th...

Backing vacuum for wafer processing and electronic component manufacturing.

Cleanroom drying and freeze drying, sensitive to oil content.

Distillation, desolvation, and solvent recovery with complex media.

Providing an oil-free medium-vacuum environment for high-vacuum coating.

Oil-free extraction for electrolyte filling and vacuum baking.

Food-grade clean vacuum needs, avoiding oil contamination.

Oil-free clean gas source prevents particle or oil mist contamination.

Meets GMP requirements; moisture and solvents pre-condensed.

Dry operation tolerates solvent vapors and reduces waste oil.

Serves as a molecular pump backing, providing a clean vacuum base.

Extracts internal moisture; dry pumps handle vapor well.

No oil contamination risk, ensuring hygienic and safe packaging.
Usage Limitations: When extracting large amounts of water vapor or condensable gases, purging or condensing pretreatment is required. Dusty conditions require high-efficiency filters. Not suitable for highly corrosive gases (unless customized with anti-corrosion materials).
Selection Advice: Confirm target vacuum, media dust/moisture/solvent vapor content, corrosive components, continuous operating cycle, and whether nitrogen purge or pre-filtration is needed.
The rotors operate without contact. With matched working conditions and regular maintenance, the lifespan is relatively long. The key lies in proper front-end filtration and pretreatment.
Yes, but it is recommended to add a pre-condenser or purge device to prevent solvent liquefaction from affecting the pump.
Dry oil-free systems require no vacuum pump oil and generate no waste oil during operation, ensuring a clean output gas path.
A suitable filter must be installed at the intake, and the filter element should be cleaned regularly to protect the internal rotor clearance.
The dry screw structure is compact and operates relatively smoothly with low noise, meeting general industrial environment requirements.
Explosion-proof motors and control systems can be customized to meet specific hazardous area requirements. Please consult our engineers.
Please fill in your requirements carefully, and we will contact you within 24 hours.